Small DC motor with 1:48 gear reduction, plastic gears, voltage range: 3 V to 6 V, 115 rpm, single shaft
Pulsador táctil de 2 pines, pines cortos, 6x6 mm, SPST normalmente abierto.
Temporizador (monoestable) que además puede ser configurado como oscilador (astable), frecuencia 500 kHz. encapsulado SMD/SMT SOIC. Original
Versión CMOS del 555. Temporizador (monoestable), que además puede ser configurado como oscilador (astable), alta frecuencia: 2.1 MHz, bajo consumo de potencia, alimentación 2 V a 15 V, compatible con TTL, CMOS y MOS. Original
CMOS version of the 555 timer (monostable), which can also be configured as an oscillator (astable), high frequency: 3 MHz, very low power consumption, supply voltage: 1.5 V to 15 V, TTL and CMOS compatible. Original
CMOS version of the 556. Dual timer (monostable) that can also be configured as an oscillator (astable); high frequency (2.1 MHz), very low power consumption, 2 V to 15 V supply voltage, compatible with TTL, CMOS, and MOS. Contains two independent 555 timers. Original.
Universal printed circuit board, single side, 5 cm x 7 cm aprox.
6 D-type flip-flops, independent data input, shared clock and clears, rising edge triggered. DIP. CMOS. Original
14-stage ripple binary counter, can be used as a divider/timer, 12 outputs, Schmitt trigger input, falling edge triggered. DIP. CMOS. Original
7-stage ripple binary counter, can be used as a divider/timer, 7 outputs, Schmitt trigger input, falling edge triggered. DIP. CMOS. Original
12-stage ripple binary counter, can be used as a divider/timer, 12 outputs, Schmitt trigger input, falling edge triggered. DIP. CMOS. Original